The ADFM Pro20 from Teledyne Isco (USA) brings unparalleled flow measurement accuracy to large pipes and channels, delivering flow rate data within 2% of actual value, in flow depths up to 20 feet (6m). Four (4) piezoelectric ceramics in the sensor emit short pulses along narrow acoustic beams pointing in different directions to measure velocity. A fifth ceramic mounted in the center of assembly, and aimed vertically, is used to measure the depth.
Each acoustic beam measures velocity at multiple points, known as bin, in the water column. The measured velocity data each bin are very precise- to within 0.01ft/s. The distribution accurate velocity measurement is then used to determined the flow pattern over the entire cross-section flow. Since the flow pattern and measured velocity distribution are dependent to each other, the ADFM's advanced flow algorithms automatically adapt to changing hydraulic condition within the pipe. the removes the need for in-situ calibration and insures flow rate measurement over a host of different measurement environments and hydraulic condition.
The ADFM enclosure houses the signal processing, data logging, and data output electronics. The enclosure is available as NEMA 4X Box housing, suitable for wall or console mounting in permanent application, and NEMA 6P cylindrical housing for use in manholes or other 'wet' environments.
No comments:
Post a Comment